Gable apex storage
Fills a gable wall where the roof comes down on both sides. The middle sections are the tallest and the rest step down towards each side, every one with its own flat top just under the roof.
Made for eaves and lofts and bedrooms.
Design your own at launch.
Put in your sizes, see the price and order from this page when we open. Join the waiting list and we'll send you a free sample pack.
- Made to your sizes, to the millimetre
- Nothing cut until you've confirmed your design
- Instructions for your exact piece, every panel labelled
Your sizes, your choices.
- WidthTo your size
- HeightsThe top of the apex and each low end, from your measurements
- DepthTo your size
- SectionsSet automatically from the width, or choose
- Open or doorsPer section
- Fitted or freestandingFitted only
If anything you choose won't work, the page tells you why and what to change, before you order.
Built in.
Fitted: give us the opening, wall to wall. We make the piece to slide in and send infill panels to close the gaps, so it looks built in.
Measure in millimetres, in three places.
Give us the smallest of each. Walls are rarely straight, and the piece has to fit the tightest point.
An afternoon, not a weekend.
The instructions are made for your exact piece, not a generic leaflet, and every panel is labelled to match. You'll need a drill, a screwdriver and a spirit level.
Everything is built standing up, so nothing needs lifting over your head, and tall pieces fix to the wall with the fixings in the box.
Made to measure, without the worry.
Nothing cut until you confirm
You sign off a full specification of your design before we cut a thing. We look over every design too, and get in touch if something looks off.
Built-in allowance
50mm of tolerance on fitted pieces, for walls that aren't quite square. Freestanding pieces are made to your exact measurements.
Missing a part?
Tell us and the replacement is on its way, no arguments.
Delivered by us
Cut to order, flat-packed and brought to your door in our own van.
What if the point isn't in the middle?
That's fine. Measure from one side to the highest point and we'll set the steps from there.
Does it have to fill the whole wall?
No. Make it as wide as you like; the steps follow the roof wherever it stops.
Is it hard to build?
If you've built flatpack before, you can build this. Every panel is labelled, and the build guide is made for your exact piece.
Can I see the colours first?
Yes. Our sample pack has our colours and a cut edge, so you can see them in your own light before you order.
Pieces that go with it.
Stepped shelving
Open shelves that step down under the stairs or a sloping roof.
Stepped cupboards
Cupboards that step down under the stairs or a sloping roof.
Knee-wall storage
Cupboards against the low wall of a loft room, cut to the angle of the roof.
Storage under a slope and a flat ceiling
Full height where the ceiling is flat, stepping down where it slopes.